diff --git a/PackageSources/SimObjects/Airplanes/TFDi_Design_MD-11_GE/Checklist/TFDi_MD11_Checklist.xml b/PackageSources/SimObjects/Airplanes/TFDi_Design_MD-11_GE/Checklist/TFDi_MD11_Checklist.xml
index 602e961..2019eb5 100644
--- a/PackageSources/SimObjects/Airplanes/TFDi_Design_MD-11_GE/Checklist/TFDi_MD11_Checklist.xml
+++ b/PackageSources/SimObjects/Airplanes/TFDi_Design_MD-11_GE/Checklist/TFDi_MD11_Checklist.xml
@@ -1,10 +1,12 @@
 <?xml version="1.0" encoding="UTF-8"?>
 <SimBase.Document Type="Checklist" version="1,0">
   <Checklist.Checklist>
+    <IncludeCheckpointLibrary FileName="CheckpointsLibrary\\Asobo_DefaultCheckpointLibrary.xml" />
+
     <Step ChecklistStepId="PREFLIGHT_GATE">
       <Page SubjectTT="Cockpit Entry">
         <Checkpoint>
-          <Clue name="Ensure the Weather Radar is OFF" />
+          <Clue name="Ensure the Weather Radar is off" />
           <CheckpointDesc SubjectTT="Weather Radar" ExpectationTT="OFF" />
           <Instrument Id="MD11_PED_WXR_OFF_BT" />
           <Test>
@@ -14,7 +16,7 @@
           </Test>
         </Checkpoint>
         <Checkpoint>
-          <Clue name="Ensure the Fuel Switches are OFF" />
+          <Clue name="Ensure the Fuel Switches are off" />
           <CheckpointDesc SubjectTT="Fuel Switches" ExpectationTT="OFF" />
           <Instrument Id="MD11_THR_L_FUEL_SW" />
           <Instrument Id="MD11_THR_C_FUEL_SW" />
@@ -32,7 +34,7 @@
           </Test>
         </Checkpoint>
         <Checkpoint>
-          <Clue name="Ensure Parking Brake or Chocks are SET" />
+          <Clue name="Ensure Parking Brake or Chocks are set" />
           <CheckpointDesc SubjectTT="Parking Brake or Chocks" ExpectationTT="SET" />
           <Instrument Id="MD11_THR_PARK_LVR" />
           <Test>
@@ -45,7 +47,7 @@
           </Test>
         </Checkpoint>
         <Checkpoint>
-          <Clue name="Ensure the Flap/Slats Handle is in the UP and RETRACTED position" />
+          <Clue name="Ensure the Flap/Slats Handle is in the up and retracted position" />
           <CheckpointDesc SubjectTT="Flap/Slats Handle" ExpectationTT="UP and RETRACTED" />
           <Instrument Id="MD11_FLAP_LATCH" />
           <Test>
@@ -55,7 +57,7 @@
           </Test>
         </Checkpoint>
         <Checkpoint>
-          <Clue name="Ensure the Gear Handle is DOWN" />
+          <Clue name="Ensure the Gear Handle is down" />
           <CheckpointDesc SubjectTT="Gear Handle" ExpectationTT="DOWN" />
           <Instrument Id="MD11_MIP_GEAR_SW" />
           <Test>
@@ -65,8 +67,8 @@
           </Test>
         </Checkpoint>
         <Checkpoint>
-          <Clue name="Ensure the Fuel Dump Switches are COVERED and OFF" />
-          <CheckpointDesc SubjectTT="Fuel Dump Switches" ExpectationTT="COVERED and OFF" />
+          <Clue name="Ensure the Fuel Dump Switches are off and guarded" />
+          <CheckpointDesc SubjectTT="Fuel Dump Switches" ExpectationTT="OFF and GUARDED" />
           <Instrument Id="MD11_OVHD_FUEL_DUMP_GRD" />
           <Instrument Id="MD11_OVHD_FUEL_DUMP_STOP_GRD" />
           <Test>
@@ -85,8 +87,8 @@
           </Test>
         </Checkpoint>
         <Checkpoint>
-          <Clue name="Ensure the Manifold Drain Switch is COVERED and OFF" />
-          <CheckpointDesc SubjectTT="Manifold Drain Switch" ExpectationTT="COVERED and OFF" />
+          <Clue name="Ensure the Manifold Drain Switch is off and guarded" />
+          <CheckpointDesc SubjectTT="Manifold Drain Switch" ExpectationTT="OFF and GUARDED" />
           <Instrument Id="MD11_OVHD_FUEL_MANF_DRAIN_GRD" />
           <Test>
             <TestValue>
@@ -98,7 +100,7 @@
           </Test>
         </Checkpoint>
         <Checkpoint>
-          <Clue name="Ensure the Emergency Power Selector is OFF" />
+          <Clue name="Ensure the Emergency Power Selector is off" />
           <CheckpointDesc SubjectTT="Emergency Power Selector" ExpectationTT="OFF" />
           <Instrument Id="MD11_OVHD_ELEC_EMER_PWR_KB" />
           <Test>
@@ -255,11 +257,11 @@
               <TestValue>
                 <Operator OpType="AND">
                   <Operator OpType="AND">
-                    <Val Code="(L:MD11_AOVHD_CRGSMK_FWD_HEAT_LT) 1 ==" />
-                    <Val Code="(L:MD11_AOVHD_CRGSMK_FWD_SMOKE_LT) 1 ==" />
                     <Operator OpType="AND">
-                      <Val Code="(L:MD11_AOVHD_CRGSMK_AFT_HEAT_LT) 1 ==" />
+                      <Val Code="(L:MD11_AOVHD_CRGSMK_FWD_HEAT_LT) 1 ==" />
+                      <Val Code="(L:MD11_AOVHD_CRGSMK_FWD_SMOKE_LT) 1 ==" />
                     </Operator>
+                    <Val Code="(L:MD11_AOVHD_CRGSMK_AFT_HEAT_LT) 1 ==" />
                   </Operator>
                   <Val Code="(L:MD11_AOVHD_CRGSMK_AFT_SMOKE_LT) 1 ==" />
                 </Operator>
@@ -287,11 +289,11 @@
               <TestValue>
                 <Operator OpType="AND">
                   <Operator OpType="AND">
-                    <Val Code="(L:MD11_AOVHD_CRGSMK_FWD_AGNT1LO_LT) 1 ==" />
-                    <Val Code="(L:MD11_AOVHD_CRGSMK_FWD_AGNT2LO_LT) 1 ==" />
                     <Operator OpType="AND">
-                      <Val Code="(L:MD11_AOVHD_CRGSMK_AFT_AGNT1LO_LT) 1 ==" />
+                      <Val Code="(L:MD11_AOVHD_CRGSMK_FWD_AGNT1LO_LT) 1 ==" />
+                      <Val Code="(L:MD11_AOVHD_CRGSMK_FWD_AGNT2LO_LT) 1 ==" />
                     </Operator>
+                    <Val Code="(L:MD11_AOVHD_CRGSMK_AFT_AGNT1LO_LT) 1 ==" />
                   </Operator>
                   <Val Code="(L:MD11_AOVHD_CRGSMK_AFT_AGNT2LO_LT) 1 ==" />
                 </Operator>
@@ -395,32 +397,10 @@
           <Test>
             <TestValue>
               <Operator OpType="AND">
-                <Operator OpType="AND">
-                  <Operator OpType="AND">
-                    <Operator OpType="AND">
-                      <Operator OpType="AND">
-                        <Operator OpType="AND">
-                          <Operator OpType="AND">
-                            <Operator OpType="AND">
-                              <Operator OpType="AND">
-                                <Val Code="(L:MD11_OVHD_ENG_FADEC_1_SEL_LT) 0 ==" />
-                                <Val Code="(L:MD11_OVHD_ENG_FADEC_1_ALTN_LT) 0 ==" />
-                              </Operator>
-                              <Val Code="(L:MD11_OVHD_ENG_FADEC_2_SEL_LT) 0 ==" />
-                            </Operator>
-                            <Val Code="(L:MD11_OVHD_ENG_FADEC_2_ALTN_LT) 0 ==" />
-                          </Operator>
-                          <Val Code="(L:MD11_OVHD_ENG_FADEC_3_SEL_LT) 0 ==" />
-                        </Operator>
-                        <Val Code="(L:MD11_OVHD_ENG_FADEC_3_ALTN_LT) 0 ==" />
-                      </Operator>
-                      <Val Code="(L:MD11_OVHD_ENG_A_LT) 0 ==" />
-                    </Operator>
-                    <Val Code="(L:MD11_OVHD_ENG_A_LT) 0 ==" />
-                  </Operator>
-                  <Val Code="(L:MD11_OVHD_ENG_IGN_OVRD_LT) 0 ==" />
-                </Operator>
-                <Val Code="(L:MD11_OVHD_ENG_IGN_OFF_LT) 1 ==" />
+                <Val
+                  Code="(L:MD11_OVHD_ENG_FADEC_1_SEL_LT) 0 == (L:MD11_OVHD_ENG_FADEC_1_ALTN_LT) 0 == and (L:MD11_OVHD_ENG_FADEC_2_SEL_LT) 0 == and (L:MD11_OVHD_ENG_FADEC_2_ALTN_LT) 0 == and (L:MD11_OVHD_ENG_FADEC_3_SEL_LT) 0 == and (L:MD11_OVHD_ENG_FADEC_3_ALTN_LT) 0 == and" />
+                <Val
+                  Code="(L:MD11_OVHD_ENG_A_LT) 0 == (L:MD11_OVHD_ENG_B_LT) 0 == and (L:MD11_OVHD_ENG_IGN_OVRD_LT) 0 == and (L:MD11_OVHD_ENG_IGN_OFF_LT) 1 == and" />
               </Operator>
             </TestValue>
           </Test>
@@ -471,6 +451,9 @@
           <Clue name="Ensure the Drive 1/2/3 and CAB BUS Switches are guarded" />
           <CheckpointDesc SubjectTT="Drive 1/2/3 and CAB BUS" ExpectationTT="GUARDED" />
           <Instrument Id="MD11_OVHD_ELEC_GEN1_DRIVE_GRD" />
+          <Instrument Id="MD11_OVHD_ELEC_GEN2_DRIVE_GRD" />
+          <Instrument Id="MD11_OVHD_ELEC_GEN3_DRIVE_GRD" />
+          <Instrument Id="MD11_OVHD_ELEC_CAB_BUS_GRD" />
           <Test>
             <TestValue>
               <Operator OpType="AND">
@@ -605,7 +588,7 @@
           <Instrument Id="MD11_OVHD_LTS_NO_SMOKE_SW" />
           <Test>
             <TestValue>
-              <Val Code="(L:MD11_OVHD_LTS_NO_SMOKE_SW) 2 ==" />
+              <Val Code="(L:MD11_OVHD_LTS_NO_SMOKE_SW) 0 &gt;" />
             </TestValue>
           </Test>
         </Checkpoint>
@@ -674,55 +657,13 @@
               <TestValue>
                 <Operator OpType="AND">
                   <Operator OpType="AND">
-                    <Operator OpType="AND">
-                      <Operator OpType="AND">
-                        <Operator OpType="AND">
-                          <Operator OpType="AND">
-                            <Operator OpType="AND">
-                              <Operator OpType="AND">
-                                <Operator OpType="AND">
-                                  <Operator OpType="AND">
-                                    <Operator OpType="AND">
-                                      <Operator OpType="AND">
-                                        <Operator OpType="AND">
-                                          <Operator OpType="AND">
-                                            <Operator OpType="AND">
-                                              <Operator OpType="AND">
-                                                <Operator OpType="AND">
-                                                  <Val Code="(L:MD11_OVHD_FLTCTL_FLAPLIM_LT) 0 ==" />
-                                                  <Val Code="(L:MD11_OVHD_FLTCTL_ELEVFEEL_LT) 0 ==" />
-                                                </Operator>
-                                                <Val Code="(L:MD11_OVHD_FLTCTL_UYDAFAIL_LT) 0 ==" />
-                                              </Operator>
-                                              <Val Code="(L:MD11_OVHD_FLTCTL_UYDAOFF_LT) 0 ==" />
-                                            </Operator>
-                                            <Val Code="(L:MD11_OVHD_FLTCTL_UYDBFAIL_LT) 0 ==" />
-                                          </Operator>
-                                          <Val Code="(L:MD11_OVHD_FLTCTL_UYDBOFF_LT) 0 ==" />
-                                        </Operator>
-                                        <Val Code="(L:MD11_OVHD_FLTCTL_LYDAFAIL_LT) 0 ==" />
-                                      </Operator>
-                                      <Val Code="(L:MD11_OVHD_FLTCTL_LYDAOFF_LT) 0 ==" />
-                                    </Operator>
-                                    <Val Code="(L:MD11_OVHD_FLTCTL_LYDBFAIL_LT) 0 ==" />
-                                  </Operator>
-                                  <Val Code="(L:MD11_OVHD_FLTCTL_LYDBOFF_LT) 0 ==" />
-                                </Operator>
-                                <Val Code="(L:MD11_OVHD_FLTCTL_LLOFAIL_LT) 0 ==" />
-                              </Operator>
-                              <Val Code="(L:MD11_OVHD_FLTCTL_LLOFOFF_LT) 0 ==" />
-                            </Operator>
-                            <Val Code="(L:MD11_OVHD_FLTCTL_LLIFAIL_LT) 0 ==" />
-                          </Operator>
-                          <Val Code="(L:MD11_OVHD_FLTCTL_LLIFOFF_LT) 0 ==" />
-                        </Operator>
-                        <Val Code="(L:MD11_OVHD_FLTCTL_RLIFAIL_LT) 0 ==" />
-                      </Operator>
-                      <Val Code="(L:MD11_OVHD_FLTCTL_RLIFOFF_LT) 0 ==" />
-                    </Operator>
-                    <Val Code="(L:MD11_OVHD_FLTCTL_RLOFAIL_LT) 0 ==" />
+                    <Val
+                      Code="(L:MD11_OVHD_FLTCTL_FLAPLIM_LT) 0 == (L:MD11_OVHD_FLTCTL_ELEVFEEL_LT) 0 == and" />
+                    <Val
+                      Code="(L:MD11_OVHD_FLTCTL_UYDAFAIL_LT) 0 == (L:MD11_OVHD_FLTCTL_UYDAOFF_LT) 0 == and (L:MD11_OVHD_FLTCTL_UYDBFAIL_LT) 0 == and (L:MD11_OVHD_FLTCTL_UYDBOFF_LT) 0 == and (L:MD11_OVHD_FLTCTL_LYDAFAIL_LT) 0 == and (L:MD11_OVHD_FLTCTL_LYDAOFF_LT) 0 == and (L:MD11_OVHD_FLTCTL_LYDBFAIL_LT) 0 == and (L:MD11_OVHD_FLTCTL_LYDBOFF_LT) 0 == and" />
                   </Operator>
-                  <Val Code="(L:MD11_OVHD_FLTCTL_RLOFOFF_LT) 0 ==" />
+                  <Val
+                    Code="(L:MD11_OVHD_FLTCTL_LLOFAIL_LT) 0 == (L:MD11_OVHD_FLTCTL_LLOFOFF_LT) 0 == and (L:MD11_OVHD_FLTCTL_LLIFAIL_LT) 0 == and (L:MD11_OVHD_FLTCTL_LLIFOFF_LT) 0 == and (L:MD11_OVHD_FLTCTL_RLIFAIL_LT) 0 == and (L:MD11_OVHD_FLTCTL_RLIFOFF_LT) 0 == and (L:MD11_OVHD_FLTCTL_RLOFAIL_LT) 0 == and (L:MD11_OVHD_FLTCTL_RLOFOFF_LT) 0 == and" />
                 </Operator>
               </TestValue>
             </Test>
@@ -759,10 +700,10 @@
           <Checkpoint>
             <Clue name="Ensure the Manual Light is extinguished" />
             <CheckpointDesc SubjectTT="Manual Light" ExpectationTT="EXTINGUISHED" />
-            <Instrument Id="MD11_OVHD_PNEU_SYSTEM_SEL_BT" />
+            <Instrument Id="MD11_OVHD_PNEU_CABIN_SYSTEM_SEL_BT" />
             <Test>
               <TestValue>
-                <Val Code="(L:MD11_OVHD_PNEU_SYSTEM_MAN_LT) 0 ==" />
+                <Val Code="(L:MD11_OVHD_PNEU_CABIN_SYSTEM_MAN_LT) 0 ==" />
               </TestValue>
             </Test>
           </Checkpoint>
@@ -814,32 +755,10 @@
               <TestValue>
                 <Operator OpType="AND">
                   <Operator OpType="AND">
-                    <Operator OpType="AND">
-                      <Operator OpType="AND">
-                        <Operator OpType="AND">
-                          <Operator OpType="AND">
-                            <Operator OpType="AND">
-                              <Operator OpType="AND">
-                                <Operator OpType="AND">
-                                  <Operator OpType="AND">
-                                    <Val Code="(L:MD11_OVHD_AICE_ENG1_ON_LT) 0 ==" />
-                                    <Val Code="(L:MD11_OVHD_AICE_ENG1_DISAG_LT) 0 ==" />
-                                  </Operator>
-                                  <Val Code="(L:MD11_OVHD_AICE_ENG2_ON_LT) 0 ==" />
-                                </Operator>
-                                <Val Code="(L:MD11_OVHD_AICE_ENG2_DISAG_LT) 0 ==" />
-                              </Operator>
-                              <Val Code="(L:MD11_OVHD_AICE_ENG3_ON_LT) 0 ==" />
-                            </Operator>
-                            <Val Code="(L:MD11_OVHD_AICE_ENG3_DISAG_LT) 0 ==" />
-                          </Operator>
-                          <Val Code="(L:MD11_OVHD_AICE_WING_ON_LT) 0 ==" />
-                        </Operator>
-                        <Val Code="(L:MD11_OVHD_AICE_WING_DISAG_LT) 0 ==" />
-                      </Operator>
-                      <Val Code="(L:MD11_OVHD_AICE_TAIL_ON_LT) 0 ==" />
-                    </Operator>
-                    <Val Code="(L:MD11_OVHD_AICE_TAIL_DISAG_LT) 0 ==" />
+                    <Val
+                      Code="(L:MD11_OVHD_AICE_ENG1_ON_LT) 0 == (L:MD11_OVHD_AICE_ENG1_DISAG_LT) 0 == and (L:MD11_OVHD_AICE_ENG2_ON_LT) 0 == and (L:MD11_OVHD_AICE_ENG2_DISAG_LT) 0 == and (L:MD11_OVHD_AICE_ENG3_ON_LT) 0 == and (L:MD11_OVHD_AICE_ENG3_DISAG_LT) 0 == and" />
+                    <Val
+                      Code="(L:MD11_OVHD_AICE_WING_ON_LT) 0 == (L:MD11_OVHD_AICE_WING_DISAG_LT) 0 == and (L:MD11_OVHD_AICE_TAIL_ON_LT) 0 == and (L:MD11_OVHD_AICE_TAIL_DISAG_LT) 0 == and" />
                   </Operator>
                   <Val Code="(L:MD11_OVHD_AICE_SYSTEM_MAN_LT) 0 ==" />
                 </Operator>
@@ -859,14 +778,10 @@
             <TestValue>
               <Operator OpType="AND">
                 <Operator OpType="AND">
-                  <Operator OpType="AND">
-                    <Operator OpType="AND">
-                      <Val Code="(L:MD11_OVHD_WNDSHLD_AICE_L_ON_LT) 0 ==" />
-                      <Val Code="(L:MD11_OVHD_WNDSHLD_AICE_HIGH_LT) 0 ==" />
-                    </Operator>
-                    <Val Code="(L:MD11_OVHD_WNDSHLD_AICE_NORM_LT) 0 ==" />
-                  </Operator>
-                  <Val Code="(L:MD11_OVHD_WNDSHLD_AICE_R_ON_LT) 0 ==" />
+                  <Val
+                    Code="(L:MD11_OVHD_WNDSHLD_AICE_L_ON_LT) 0 == (L:MD11_OVHD_WNDSHLD_AICE_R_ON_LT) 0 == and" />
+                  <Val
+                    Code="(L:MD11_OVHD_WNDSHLD_AICE_HIGH_LT) 0 == (L:MD11_OVHD_WNDSHLD_AICE_NORM_LT) 0 == and" />
                 </Operator>
                 <Val Code="(L:MD11_OVHD_WNDSHLD_AICE_DEFOG_ON_LT) 0 ==" />
               </Operator>
@@ -928,19 +843,554 @@
                 <Val
                   Code="(L:MD11_LSIDE_INP_FLTDIROFF_LT) 0 == (L:MD11_LSIDE_INP_FLTDIRCAP2_LT) 0 == and (L:MD11_LSIDE_INP_FLTDIRFO1_LT) 0 == and (L:MD11_LSIDE_INP_CADCCAP2_LT) 0 == and (L:MD11_LSIDE_INP_CADCFO1_LT) 0 == and (L:MD11_LSIDE_INP_IRS_CAPTAUX_LT) 0 == and (L:MD11_LSIDE_INP_IRS_FOAUX_LT) 0 == and (L:MD11_LSIDE_INP_FMSCAP2_LT) 0 == and (L:MD11_LSIDE_INP_FMSFO1_LT) 0 == and (L:MD11_LSIDE_INP_VORCAP2_LT) 0 == and (L:MD11_LSIDE_INP_VORFO1_LT) 0 == and (L:MD11_LSIDE_INP_APPRCAP2_LT) 0 == and (L:MD11_LSIDE_INP_APPRFO1_LT) 0 == and (L:MD11_LSIDE_INP_EIS_CAPAUX_LT) 0 == and (L:MD11_LSIDE_INP_EIS_CAP2_LT) 0 == and (L:MD11_LSIDE_INP_EIS_FOAUX_LT) 0 == and (L:MD11_LSIDE_INP_EIS_FO1_LT) 0 == and" />
                 <Val
-                  Code="(L:MD11_RSIDE_INP_FLTDIROFF_LT) 0 == (L:MD11_RSIDE_INP_FLTDIRCAP2_LT) 0 == and (L:MD11_RSIDE_INP_FLTDIRFO1_LT) 0 == and (L:MD11_RSIDE_INP_CADCCAP2_LT) 0 == and (L:MD11_RSIDE_INP_CADCFO1_LT) 0 == and (L:MD11_RSIDE_INP_IRS_CAPTAUX_LT) 0 == and (L:MD11_RSIDE_INP_IRS_FOAUX_LT) 0 == and (L:MD11RLSIDE_INP_FMSCAP2_LT) 0 == and (L:MD11_RSIDE_INP_FMSFO1_LT) 0 == and (L:MD11_RSIDE_INP_VORCAP2_LT) 0 == and (L:MD11_RSIDE_INP_VORFO1_LT) 0 == and (L:MD11_RSIDE_INP_APPRCAP2_LT) 0 == and (L:MD11_RSIDE_INP_APPRFO1_LT) 0 == and (L:MD11_RSIDE_INP_EIS_CAPAUX_LT) 0 == and (L:MD11_RSIDE_INP_EIS_CAP2_LT) 0 == and (L:MD11_RSIDE_INP_EIS_FOAUX_LT) 0 == and (L:MD11_RSIDE_INP_EIS_FO1_LT) 0 == and" />
+                  Code="(L:MD11_RSIDE_INP_FLTDIROFF_LT) 0 == (L:MD11_RSIDE_INP_FLTDIRCAP2_LT) 0 == and (L:MD11_RSIDE_INP_FLTDIRFO1_LT) 0 == and (L:MD11_RSIDE_INP_CADCCAP2_LT) 0 == and (L:MD11_RSIDE_INP_CADCFO1_LT) 0 == and (L:MD11_RSIDE_INP_IRS_CAPTAUX_LT) 0 == and (L:MD11_RSIDE_INP_IRS_FOAUX_LT) 0 == and (L:MD11_RSIDE_INP_FMSCAP2_LT) 0 == and (L:MD11_RSIDE_INP_FMSFO1_LT) 0 == and (L:MD11_RSIDE_INP_VORCAP2_LT) 0 == and (L:MD11_RSIDE_INP_VORFO1_LT) 0 == and (L:MD11_RSIDE_INP_APPRCAP2_LT) 0 == and (L:MD11_RSIDE_INP_APPRFO1_LT) 0 == and (L:MD11_RSIDE_INP_EIS_CAPAUX_LT) 0 == and (L:MD11_RSIDE_INP_EIS_CAP2_LT) 0 == and (L:MD11_RSIDE_INP_EIS_FOAUX_LT) 0 == and (L:MD11_RSIDE_INP_EIS_FO1_LT) 0 == and" />
               </Operator>
             </TestValue>
           </Test>
         </Checkpoint>
+        <Block SubjectTT="PFD/ND/EAD/SD">
+          <Checkpoint>
+            <Clue name="Ensure no faults are displayed" />
+            <CheckpointDesc SubjectTT="No faults" ExpectationTT="CHECKED" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure the Altimeters are set" />
+            <CheckpointDesc SubjectTT="Altimeters" ExpectationTT="AS REQUIRED" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure the time displayed is correct" />
+            <CheckpointDesc SubjectTT="Time" ExpectationTT="CORRECT" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure the Oil Quantity is at or above minimum level for flight" />
+            <CheckpointDesc SubjectTT="Oil Quantity" ExpectationTT=">16 QUARTS" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure the PFD FMA annunciates TAKEOFF mode" />
+            <CheckpointDesc SubjectTT="PFD FMA" ExpectationTT="TAKEOFF" />
+          </Checkpoint>
+        </Block>
+        <Checkpoint>
+          <Clue name="Ensure the Gear Handle is down and 4 green is indicated" />
+          <CheckpointDesc SubjectTT="Gear Handle" ExpectationTT="DOWN, 4 GREEN" />
+          <Instrument Id="MD11_MIP_GEAR_SW" />
+          <Test>
+            <TestValue>
+              <Operator OpType="AND">
+                <Operator OpType="AND">
+                  <Operator OpType="AND">
+                    <Val Code="(L:MD11_MIP_LEFT_RED_LT) 0 == (L:MD11_MIP_LEFT_GREEN_LT) 1 == and" />
+                    <Val Code="(L:MD11_MIP_RIGHT_RED_LT) 0 == (L:MD11_MIP_RIGHT_GREEN_LT) 1 == and" />
+                  </Operator>
+                  <Val Code="(L:MD11_MIP_CTR_RED_LT) 0 == (L:MD11_MIP_CTR_GREEN_LT) 1 == and" />
+                </Operator>
+                <Val Code="(L:MD11_MIP_NOSE_RED_LT) 0 == (L:MD11_MIP_NOSE_GREEN_LT) 1 == and" />
+              </Operator>
+            </TestValue>
+          </Test>
+        </Checkpoint>
+        <Checkpoint>
+          <Clue name="Arm the Auto Brakes for RTO" />
+          <CheckpointDesc SubjectTT="Auto Brake Switch" ExpectationTT="RTO" />
+          <Instrument Id="MD11_CTR_AUTOBRAKE_SW" />
+          <Test>
+            <TestValue>
+              <Val Code="(L:MD11_CTR_AUTOBRAKE_SW) 0 ==" />
+            </TestValue>
+          </Test>
+        </Checkpoint>
+        <Checkpoint>
+          <Clue name="Ensure the Overboost Breakout Bar is fully aft" />
+          <CheckpointDesc SubjectTT="Overboost Breakout Bar" ExpectationTT="Fully AFT" />
+        </Checkpoint>
+        <Block SubjectTT="Thrust Levers">
+          <Checkpoint>
+            <Clue name="Check the Thrust Levers" />
+            <CheckpointDesc SubjectTT="Thrust Levers" ExpectationTT="CHECK" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue
+              name="Ensure the Thrust Levers have full range and all applicable CAWS alerts sound" />
+            <CheckpointDesc SubjectTT="Travel and Aural Warnings" ExpectationTT="CHECKED" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure the Reverser Levers are stowed" />
+            <CheckpointDesc SubjectTT="Reverser Levers" ExpectationTT="STOWED" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure the Thrust Levers are closed" />
+            <CheckpointDesc SubjectTT="Thrust Levers" ExpectationTT="CLOSED" />
+          </Checkpoint>
+        </Block>
+        <Checkpoint>
+          <Clue name="Ensure the Dial-a-Flap is in the calculated TO Setting" />
+          <CheckpointDesc SubjectTT="Dial-a-Flap" ExpectationTT="TO SETTING" />
+          <Instrument Id="MD11_DIALAFLAP_WHEEL_RNG" />
+        </Checkpoint>
+        <Checkpoint>
+          <Clue name="Ensure the Engine Start Switches are pushed in" />
+          <CheckpointDesc SubjectTT="Engine Start Switches" ExpectationTT="PUSHED IN" />
+          <Instrument Id="MD11_THR_L_START_SW" />
+          <Instrument Id="MD11_THR_C_START_SW" />
+          <Instrument Id="MD11_THR_R_START_SW" />
+          <Test>
+            <TestValue>
+              <Operator OpType="AND">
+                <Operator OpType="AND">
+                  <Val Code="(L:MD11_THR_L_START_SW) 0 ==" />
+                  <Val Code="(L:MD11_THR_C_START_SW) 0 ==" />
+                </Operator>
+                <Val Code="(L:MD11_THR_R_START_SW) 0 ==" />
+              </Operator>
+            </TestValue>
+          </Test>
+        </Checkpoint>
+        <Checkpoint>
+          <Clue name="Ensure the Fuel Switches are off" />
+          <CheckpointDesc SubjectTT="Fuel Switches" ExpectationTT="OFF" />
+          <Instrument Id="MD11_THR_L_FUEL_SW" />
+          <Instrument Id="MD11_THR_C_FUEL_SW" />
+          <Instrument Id="MD11_THR_R_FUEL_SW" />
+          <Test>
+            <TestValue>
+              <Operator OpType="AND">
+                <Operator OpType="AND">
+                  <Val Code="(L:MD11_THR_L_FUEL_SW) 0 ==" />
+                  <Val Code="(L:MD11_THR_C_FUEL_SW) 0 ==" />
+                </Operator>
+                <Val Code="(L:MD11_THR_R_FUEL_SW) 0 ==" />
+              </Operator>
+            </TestValue>
+          </Test>
+        </Checkpoint>
+        <Checkpoint>
+          <Clue name="Ensure all SDCP lights are out and any remaining alerts are expected or noted" />
+          <CheckpointDesc SubjectTT="SDCP" ExpectationTT="CUE LIGHTS and CLEAR" />
+          <Instrument Id="MD11_PED_SD_ENG_BT" />
+          <Instrument Id="MD11_PED_SD_HYD_BT" />
+          <Instrument Id="MD11_PED_SD_ELEC_BT" />
+          <Instrument Id="MD11_PED_SD_AIR_BT" />
+          <Instrument Id="MD11_PED_SD_FUEL_BT" />
+          <Instrument Id="MD11_PED_SD_CONFIG_BT" />
+          <Instrument Id="MD11_PED_SD_MISC_BT" />
+          <Test>
+            <TestValue>
+              <Operator OpType="AND">
+                <Operator OpType="AND">
+                  <Operator OpType="AND">
+                    <Val Code="(L:MD11_PED_SD_ENG_LT) 0 == (L:MD11_PED_SD_HYD_LT) 0 == and" />
+                    <Val Code="(L:MD11_PED_SD_ELEC_LT) 0 == (L:MD11_PED_SD_AIR_LT) 0 == and" />
+                  </Operator>
+                  <Val Code="(L:MD11_PED_SD_FUEL_LT) 0 == (L:MD11_PED_SD_CONFIG_LT) 0 == and" />
+                </Operator>
+                <Val Code="(L:MD11_PED_SD_MISC_LT) 0 ==" />
+              </Operator>
+            </TestValue>
+          </Test>
+        </Checkpoint>
+        <Checkpoint>
+          <Clue name="Set the Radios as required" />
+          <CheckpointDesc SubjectTT="Radio Panels" ExpectationTT="AS REQUIRED" />
+          <Instrument Id="MD11_PED_CPT_OUTER_RADIO_FREQ_SEL_KB" />
+          <Instrument Id="MD11_PED_CPT_INNER_RADIO_FREQ_SEL_KB" />
+          <Instrument Id="MD11_PED_FO_OUTER_RADIO_FREQ_SEL_KB" />
+          <Instrument Id="MD11_PED_FO_INNER_RADIO_FREQ_SEL_KB" />
+        </Checkpoint>
+        <Checkpoint>
+          <Clue name="Perform the Weather Radar test" />
+          <CheckpointDesc SubjectTT="Weather Radar" ExpectationTT="TEST then OFF" />
+          <Instrument Id="MD11_PED_WXR_TEST_BT" />
+        </Checkpoint>
+        <Checkpoint>
+          <Clue name="Set the Transponder as required" />
+          <CheckpointDesc SubjectTT="Transponder" ExpectationTT="SET" />
+          <Instrument Id="MD11_PED_XPNDR_ABV_BLW_SW" />
+          <Instrument Id="MD11_PED_XPNDR_ALT_RPTG_KB" />
+          <Instrument Id="MD11_PED_XPNDR_MODE_KB" />
+        </Checkpoint>
+        <Checkpoint>
+          <Clue name="Ensure the Rudder Trim is at zero" />
+          <CheckpointDesc SubjectTT="Rudder Trim" ExpectationTT="ZERO" />
+          <Instrument Id="MD11_PED_RUD_TRIM_SW" />
+          <Test>
+            <TestValue>
+              <Operator OpType="AND">
+                <Val Code="(L:MD11_PED_RUD_TRIM_IND) 24.5 &gt;" />
+                <Val Code="(L:MD11_PED_RUD_TRIM_IND) 25.5 &lt;" />
+              </Operator>
+            </TestValue>
+          </Test>
+        </Checkpoint>
+        <Checkpoint>
+          <Clue name="Ensure the Aileron Trim is at zero" />
+          <CheckpointDesc SubjectTT="Aileron Trim" ExpectationTT="ZERO" />
+          <Instrument Id="MD11_PED_AIL_TRIM_KB" />
+          <Test>
+            <TestValue>
+              <Operator OpType="AND">
+                <Val Code="(L:MD11_PED_AIL_TRIM_IND) 24.5 &gt;" />
+                <Val Code="(L:MD11_PED_AIL_TRIM_IND) 25.5 &lt;" />
+              </Operator>
+            </TestValue>
+          </Test>
+        </Checkpoint>
+        <Checkpoint>
+          <Clue name="Ensure the Air Driven Generator (ADG) Handle is down" />
+          <CheckpointDesc SubjectTT="ADG Handle" ExpectationTT="DOWN and WIRED" />
+          <Instrument Id="MD11_PED_ADG_LVR" />
+          <Test>
+            <TestValue>
+              <Val Code="(L:MD11_PED_ADG_LVR) 0 ==" />
+            </TestValue>
+          </Test>
+        </Checkpoint>
       </Page>
 
-      <Page SubjectTT="ENGINE STARTING">
+      <Page SubjectTT="Before Start">
+        <Checkpoint>
+          <Clue name="Start the APU" />
+          <CheckpointDesc SubjectTT="APU" ExpectationTT="START" />
+          <Instrument Id="MD11_OVHD_ELEC_APU_PWR_BT" />
+        </Checkpoint>
+        <Checkpoint>
+          <Clue name="Set APU Bleed to on" />
+          <CheckpointDesc SubjectTT="APU BLEED" ExpectationTT="ON" />
+          <Instrument Id="MD11_OVHD_PNEU_APU_BLEED_BT" />
+          <Test>
+            <TestValue>
+              <Val Code="(L:MD11_OVHD_PNEU_APU_BLEED_BT) 1 ==" />
+            </TestValue>
+          </Test>
+        </Checkpoint>
+        <Block SubjectTT="FMS">
+          <Checkpoint>
+            <Clue name="Ensure the FMS is Initialized" />
+            <CheckpointDesc SubjectTT="FMS" ExpectationTT="INITIALIZED and CHECKED" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure the correct Weights have been entered" />
+            <CheckpointDesc SubjectTT="Weights" ExpectationTT="CONFIRMED" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure the correct Takeoff Wind Component has been entered" />
+            <CheckpointDesc SubjectTT="Headwind/Tailwind" ExpectationTT="CONFIRMED" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure the correct Runway Slope has been entered" />
+            <CheckpointDesc SubjectTT="Runway Slope" ExpectationTT="CONFIRMED" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure the correct Takeoff Temperature has been entered" />
+            <CheckpointDesc SubjectTT="Temperature" ExpectationTT="CONFIRMED" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure the V-SPEEDS are correct" />
+            <CheckpointDesc SubjectTT="V-Speeds" ExpectationTT="CONFIRMED" />
+          </Checkpoint>
+        </Block>
+        <Checkpoint>
+          <Clue name="Ensure all three IRS switches are in NAV and hte units are aligned" />
+          <CheckpointDesc SubjectTT="IRS" ExpectationTT="NAV and ALIGNED" />
+          <Instrument Id="MD11_OVHD_IRS_1_KB" />
+          <Instrument Id="MD11_OVHD_IRS_2_KB" />
+          <Instrument Id="MD11_OVHD_IRS_3_KB" />
+          <Test>
+            <TestValue>
+              <Operator OpType="AND">
+                <Operator OpType="AND">
+                  <Val Code="(L:MD11_OVHD_IRS_1_KB) 1 ==" />
+                  <Val Code="(L:MD11_OVHD_IRS_2_KB) 1 ==" />
+                </Operator>
+                <Val Code="(L:MD11_OVHD_IRS_3_KB) 1 ==" />
+              </Operator>
+            </TestValue>
+          </Test>
+        </Checkpoint>
+        <Checkpoint>
+          <Clue name="Set the EIS/Bugs as required" />
+          <CheckpointDesc SubjectTT="EIS/Bugs" ExpectationTT="SET" />
+        </Checkpoint>
+        <Checkpoint>
+          <Clue name="Set the Seat Belt Signs to on" />
+          <CheckpointDesc SubjectTT="Seat Belt Switch" ExpectationTT="ON" />
+          <Instrument Id="MD11_OVHD_LTS_SEAT_BELTS_SW" />
+          <Test>
+            <TestValue>
+              <Val Code="(L:MD11_OVHD_LTS_SEAT_BELTS_SW) 0 &gt;" />
+            </TestValue>
+          </Test>
+        </Checkpoint>
+        <Checkpoint>
+          <Clue name="Set External Power Switches off" />
+          <CheckpointDesc SubjectTT="External Power Switches" ExpectationTT="OFF" />
+          <Instrument Id="MD11_OVHD_ELEC_GLY_EXT_PWR_BT" />
+          <Instrument Id="MD11_OVHD_ELEC_EXT_PWR_BT" />
+          <Test>
+            <TestValue>
+              <Operator OpType="AND">
+                <Val Code="(L:MD11_OVHD_ELEC_GLY_EXT_PWR_ON_LT) 0 ==" />
+                <Val Code="(L:MD11_OVHD_ELEC_EXT_PWR_ON_LT) 0 ==" />
+              </Operator>
+            </TestValue>
+          </Test>
+        </Checkpoint>
+        <Checkpoint>
+          <Clue name="Turn on the AUX HYD Pump to ensure brake pressure during pushback" />
+          <CheckpointDesc SubjectTT="AUX HYD Pump 1" ExpectationTT="ON" />
+          <Instrument Id="MD11_CTR_AUX_HYD_PUMP_BT" />
+          <Test>
+            <TestValue>
+              <Val Code="(L:MD11_CTR_AUX_HYD_PUMP_LT) 1 ==" />
+            </TestValue>
+          </Test>
+        </Checkpoint>
+        <Checkpoint>
+          <Clue name="Turn on either the A, B, or both ignition systems" />
+          <CheckpointDesc SubjectTT="Engine Ignition" ExpectationTT="A,B, or BOTH" />
+          <Instrument Id="MD11_OVHD_ENG_A_BT" />
+          <Instrument Id="MD11_OVHD_ENG_B_BT" />
+          <Test>
+            <TestValue>
+              <Operator OpType="OR">
+                <Val Code="(L:MD11_OVHD_ENG_A_LT) 1 ==" />
+                <Val Code="(L:MD11_OVHD_ENG_B_LT) 1 ==" />
+              </Operator>
+            </TestValue>
+          </Test>
+        </Checkpoint>
+        <Checkpoint>
+          <Clue name="Turn on the Beacon Light" />
+          <CheckpointDesc SubjectTT="Beacon Light" ExpectationTT="ON" />
+          <Instrument Id="MD11_OVHD_LTS_BCN_BT" />
+          <Test>
+            <TestValue>
+              <Val Code="(L:MD11_OVHD_LTS_BCN_LT) 0 ==" />
+            </TestValue>
+          </Test>
+        </Checkpoint>
+      </Page>
 
+      <Page SubjectTT="Engine Start">
+        <Block SubjectTT="Starting Engine 3">
+          <Checkpoint>
+            <Clue name="Pull the Engine Start Switch" />
+            <CheckpointDesc SubjectTT="Engine Start Switch" ExpectationTT="PULLED" />
+            <Instrument Id="MD11_THR_R_START_SW" />
+            <Test>
+              <TestValue>
+                <Val Code="(L:MD11_THR_R_START_SW) 1 ==" />
+              </TestValue>
+            </Test>
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure at least 15% N2" />
+            <CheckpointDesc SubjectTT="N2" ExpectationTT=">=15%" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure Oil Pressure is rising" />
+            <CheckpointDesc SubjectTT="Oil Pressure" ExpectationTT="RISING" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Open the Fuel Switch" />
+            <CheckpointDesc SubjectTT="Fuel Switch" ExpectationTT="ON" />
+            <Instrument Id="MD11_THR_R_FUEL_SW" />
+            <Test>
+              <TestValue>
+                <Val Code="(L:MD11_THR_R_FUEL_SW) 1 ==" />
+              </TestValue>
+            </Test>
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure the Engine Ignition turns on in max. 25s" />
+            <CheckpointDesc SubjectTT="Engine Ignition" ExpectationTT="VERIFY &lt;= 25s" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure EGT is within limits" />
+            <CheckpointDesc SubjectTT="EGT" ExpectationTT="CHECK" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure the Engine Start Switch returns at 45% N2" />
+            <CheckpointDesc SubjectTT="Engine Start Switch" ExpectationTT="RETURNS at 45% N2" />
+            <Instrument Id="MD11_THR_R_START_SW" />
+            <Test>
+              <TestValue>
+                <Val Code="(L:MD11_THR_R_START_SW) 0 ==" />
+              </TestValue>
+            </Test>
+          </Checkpoint>
+        </Block>
+        <Block SubjectTT="Verify Engine 3 Stabilization">
+          <Checkpoint>
+            <Clue name="Ensure around 25% N1" />
+            <CheckpointDesc SubjectTT="N1" ExpectationTT="~25%" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure around 300C to 400C EGT" />
+            <CheckpointDesc SubjectTT="EGT" ExpectationTT="~300C to 400C" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure around 65% N2" />
+            <CheckpointDesc SubjectTT="N2" ExpectationTT="~65%" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure Oil Quantity around 7 quarts less" />
+            <CheckpointDesc SubjectTT="Oil" ExpectationTT="7 QTS less" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure Fuel Flow at around 1200kg/2600lbs at SL" />
+            <CheckpointDesc SubjectTT="Fuel Flow" ExpectationTT="~1200KG/2600LBS" />
+          </Checkpoint>
+        </Block>
+        <Block SubjectTT="Starting Engine 1">
+          <Checkpoint>
+            <Clue name="Pull the Engine Start Switch" />
+            <CheckpointDesc SubjectTT="Engine Start Switch" ExpectationTT="PULLED" />
+            <Instrument Id="MD11_THR_L_START_SW" />
+            <Test>
+              <TestValue>
+                <Val Code="(L:MD11_THR_L_START_SW) 1 ==" />
+              </TestValue>
+            </Test>
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure at least 15% N2" />
+            <CheckpointDesc SubjectTT="N2" ExpectationTT=">=15%" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure Oil Pressure is rising" />
+            <CheckpointDesc SubjectTT="Oil Pressure" ExpectationTT="RISING" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Open the Fuel Switch" />
+            <CheckpointDesc SubjectTT="Fuel Switch" ExpectationTT="ON" />
+            <Instrument Id="MD11_THR_L_FUEL_SW" />
+            <Test>
+              <TestValue>
+                <Val Code="(L:MD11_THR_L_FUEL_SW) 1 ==" />
+              </TestValue>
+            </Test>
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure the Engine Ignition turns on in max. 25s" />
+            <CheckpointDesc SubjectTT="Engine Ignition" ExpectationTT="VERIFY &lt;= 25s" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure EGT is within limits" />
+            <CheckpointDesc SubjectTT="EGT" ExpectationTT="CHECK" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure the Engine Start Switch returns at 45% N2" />
+            <CheckpointDesc SubjectTT="Engine Start Switch" ExpectationTT="RETURNS at 45% N2" />
+            <Instrument Id="MD11_THR_L_START_SW" />
+            <Test>
+              <TestValue>
+                <Val Code="(L:MD11_THR_L_START_SW) 0 ==" />
+              </TestValue>
+            </Test>
+          </Checkpoint>
+        </Block>
+        <Block SubjectTT="Verify Engine 1 Stabilization">
+          <Checkpoint>
+            <Clue name="Ensure around 25% N1" />
+            <CheckpointDesc SubjectTT="N1" ExpectationTT="~25%" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure around 300C to 400C EGT" />
+            <CheckpointDesc SubjectTT="EGT" ExpectationTT="~300C to 400C" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure around 65% N2" />
+            <CheckpointDesc SubjectTT="N2" ExpectationTT="~65%" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure Oil Quantity around 7 quarts less" />
+            <CheckpointDesc SubjectTT="Oil" ExpectationTT="7 QTS less" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure Fuel Flow at around 1200kg/2600lbs at SL" />
+            <CheckpointDesc SubjectTT="Fuel Flow" ExpectationTT="~1200KG/2600LBS" />
+          </Checkpoint>
+        </Block>
+        <Block SubjectTT="Starting Engine 2">
+          <Checkpoint>
+            <Clue name="Pull the Engine Start Switch" />
+            <CheckpointDesc SubjectTT="Engine Start Switch" ExpectationTT="PULLED" />
+            <Instrument Id="MD11_THR_C_START_SW" />
+            <Test>
+              <TestValue>
+                <Val Code="(L:MD11_THR_C_START_SW) 1 ==" />
+              </TestValue>
+            </Test>
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure at least 15% N2" />
+            <CheckpointDesc SubjectTT="N2" ExpectationTT=">=15%" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure Oil Pressure is rising" />
+            <CheckpointDesc SubjectTT="Oil Pressure" ExpectationTT="RISING" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Open the Fuel Switch" />
+            <CheckpointDesc SubjectTT="Fuel Switch" ExpectationTT="ON" />
+            <Instrument Id="MD11_THR_C_FUEL_SW" />
+            <Test>
+              <TestValue>
+                <Val Code="(L:MD11_THR_C_FUEL_SW) 1 ==" />
+              </TestValue>
+            </Test>
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure the Engine Ignition turns on in max. 25s" />
+            <CheckpointDesc SubjectTT="Engine Ignition" ExpectationTT="VERIFY &lt;= 25s" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure EGT is within limits" />
+            <CheckpointDesc SubjectTT="EGT" ExpectationTT="CHECK" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure the Engine Start Switch returns at 45% N2" />
+            <CheckpointDesc SubjectTT="Engine Start Switch" ExpectationTT="RETURNS at 45% N2" />
+            <Instrument Id="MD11_THR_C_START_SW" />
+            <Test>
+              <TestValue>
+                <Val Code="(L:MD11_THR_C_START_SW) 0 ==" />
+              </TestValue>
+            </Test>
+          </Checkpoint>
+        </Block>
+        <Block SubjectTT="Verify Engine 2 Stabilization">
+          <Checkpoint>
+            <Clue name="Ensure around 25% N1" />
+            <CheckpointDesc SubjectTT="N1" ExpectationTT="~25%" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure around 300C to 400C EGT" />
+            <CheckpointDesc SubjectTT="EGT" ExpectationTT="~300C to 400C" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure around 65% N2" />
+            <CheckpointDesc SubjectTT="N2" ExpectationTT="~65%" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure Oil Quantity around 7 quarts less" />
+            <CheckpointDesc SubjectTT="Oil" ExpectationTT="7 QTS less" />
+          </Checkpoint>
+          <Checkpoint>
+            <Clue name="Ensure Fuel Flow at around 1200kg/2600lbs at SL" />
+            <CheckpointDesc SubjectTT="Fuel Flow" ExpectationTT="~1200KG/2600LBS" />
+          </Checkpoint>
+        </Block>
       </Page>
 
       <Page SubjectTT="After Start">
-
+        <Checkpoint>
+          <Clue name="Set the Engine Anti-Ice as required" />
+          <CheckpointDesc SubjectTT="Engine Anti-Ice" ExpectationTT="AS REQUIRED" />
+          <Instrument Id="MD11_OVHD_AICE_ENG1_BT" />
+          <Instrument Id="MD11_OVHD_AICE_ENG2_BT" />
+          <Instrument Id="MD11_OVHD_AICE_ENG3_BT" />
+        </Checkpoint>
       </Page>
     </Step>